Our Services
Charge at home. Drive with confidence.
Overview
Charge at home. Drive with confidence.
Professional EV charger installation in Seattle and across the Eastside. We wire 240-volt Level 2 home chargers — Tesla Wall Connector, ChargePoint, JuiceBox, Grizzl-E — so your car charges overnight and you wake up to a full battery.
When you bring home an EV, the dealership hands you a Level 1 cord that plugs into a regular outlet — and then you find out it adds about four miles of range per hour. That's not a charger; that's a trickle. A proper EV charger installation in Seattle means wiring a 240-volt Level 2 circuit so your car charges overnight and you wake up to a full battery.
We've installed home chargers across the Greater Seattle area — Tesla Wall Connectors, ChargePoint Home Flex, JuiceBox, Grizzl-E, and the universal NEMA 14-50 outlets that work with any portable EVSE. Whatever brand you bought (or are planning to), we can get it wired right the first time.
Mad Dog Electric is a licensed and bonded electrical contractor based in Washington. Every install is permitted, inspected by L&I, and warrantied. No subcontractors, no surprise fees, no "we'll need to come back tomorrow."
Why Mad Dog
Level 2 pulls 7.2–11.5 kW versus 1.4 kW for a standard outlet — full charge overnight instead of all weekend.
Tesla Wall Connector, ChargePoint Home Flex, JuiceBox, Grizzl-E, Emporia, or a universal NEMA 14-50. We've installed them all.
Real load calc during the site visit. We'll tell you straight if your panel can handle it or needs an upgrade first.
Every install gets an L&I electrical permit and inspection. We pull it, schedule it, and meet the inspector ourselves.
The Mad Dog Guarantee
How It Works
Free in-person or video site visit. We look at your panel, the run, and the unit you have (or want) to give you a real quote.
We pull the L&I electrical permit and schedule the install — usually within a week of quote acceptance.
Most single-charger installs are done in a half day. We run wire, install the unit, and test under load before we leave.
We meet the L&I inspector — you don't have to be there. Then we walk you through using your charger.
Real Pricing
Honest range for a typical Level 2 install in the Seattle area. Where you land depends on the run length, drilling, and panel work.
Simple install
$800 – $1,200
Panel inside garage, charger 10 feet away
Average install
$1,400 – $1,900
50–60 ft run, some drilling, hardwired smart charger
Complex install
$2,000 – $2,800+
Long run, finished walls, or sub-panel needed
The unit itself is separate ($400–$700 typical). If your panel is at capacity and needs to be upgraded to 200 amp first, expect to add $2,500–$4,500 for that work — we always quote both pieces clearly.
Permits & Code
Every EV charger circuit installation in Washington requires an L&I electrical permit and an inspection. Skipping the permit can void homeowner's insurance and cause issues at sale — we always pull it as part of the standard service. Federal tax credits for residential EV charger installs are still available through the IRS; we'll give you an itemized invoice so your accountant has what they need.
From the Field
Straight from the truck — actual ev chargerswork we've done around the greater Seattle area.
On a recent job, the panel and the spots that needed power were on opposite ends of a finished home with almost no easy path between them. We wired a Level 2 EV charger and new heated-floor circuits by carefully fishing the runs through tight, hard-to-reach spaces — and finished with barely a drywall patch to show for it.
“I had a wonderful experience with Mad Dog Electric. They were recommended to me by friends who were very happy with their service, so I decided to call. David answered right away and was very friendly, professional, and easy to talk to. He took the time to understand what I needed and explained everything in a clear, simple way. We scheduled a consultation, and he arrived on time, inspected everything efficiently, and gave me very helpful advice. He explained the best options for my situation, the possible price range, the steps of the work, and what would be involved both on his side and with the city. I really appreciated how patient, honest, and knowledgeable he was. David was a pleasure to work with, and I would gladly recommend him to anyone looking for a reliable electrician. Thank you very much, David!”
Anna K.
Verified Google Review
FAQ
Service Area
Serving Seattle, Bellevue, Kirkland, Redmond, Everett, Issaquah, Sammamish, and the rest of the Eastside and Snohomish County.
View All Service AreasExplore More
Get a free estimate on your next electrical project. No pressure, no hidden fees — just honest answers from your neighborhood pack.
